Used 2021 CATERPILLAR D9T | Bulldozers

1 Ground Clearance* 596 23.4
2 Track Gauge 2250 88.6
3 Width without Trunnions (Standard Shoe) 2880 113.4
4 Width over Trunnions 3300 129.9
5 Height (FOPS Cab)* 3820 150.4
6 Height (Top of Stack)* 3997 157.4
7 Height (ROPS/Canopy)* 4000 157.5
8 Drawbar Height (Center of Clevis)* 763 30.0
9 Length of Track on Ground 3470 136.6
10 Overall Length Basic Tractor 4910 193.3
11 Length Basic Tractor with Drawbar 5180 204.0
12 Length Basic Tractor with Winch 5545 218.3
13 Length with SU-Blade** 6880 270.9
14 Length with U-Blade 6967 274.3
15 Length with Single-Shank Ripper 6529 257.0
16 Length with Multi-Shank Ripper 6538 257.4
17 Overall Length (SU-Blade/SS Ripper) 8230 324.0
**Includes grouser height for total dimensions on hard surfaces.
**Includes drawbar.
D9T Dozer Specifications
Engine – Tier 4 Final and Stage IV
Engine Model Cat C18 ACERT
Bore 145 mm 5.7 in
Stroke 183 mm 7.2 in
Displacement 18.1 L 1,106 in3
Engine Power
Gross SAE J1995* 350 kW 469 hp
ISO 14396 343 kW 460 hp
Net Power SAE J1349/ISO 9249 325 kW 436 hp
*Excludes all fan losses.
• Engine ratings apply at 1,800 rpm.
• Net power advertised is the power available at the fl ywheel when
the engine is equipped with air cleaner, muffl er, alternator, fan,
and engine emissions controls as required.
• Ultra low sulfur diesel (ULSD) and low ash oil (CJ-4) are required.
– Diesel Exhaust Fluid (DEF) that meets ISO-22241 specifi cations
is required.
Weights
Operating Weight 48 361 kg 106,618 lb
Shipping Weight 36 316 kg 80,062 lb
• D9T Operating Weight includes hydraulic controls, blade tilt
cylinder, coolant, lubricants, full fuel tank, ROPS, FOPS cab,
SU-Blade, Single-Shank Ripper, 610 mm (24 in) ES shoes,
and operator.
• D9T Shipping Weight includes base machine chassis with cab,
pivot shaft, roller frames, track and ROPS.
Transmission
1 Forward 3.9 km/h 2.4 mph
2 Forward 6.8 km/h 4.2 mph
3 Forward 11.7 km/h 7.3 mph
1 Reverse 4.7 km/h 2.9 mph
2 Reverse 8.4 km/h 5.2 mph
3 Reverse 14.3 km/h 8.9 mph
1 Forward – Drawbar Pull 716 500 N 161,000 lbf
2 Forward – Drawbar Pull 400 500 N 90,000 lbf
3 Forward – Drawbar Pull 222 500 N 50,000 lbf
Hydraulic Controls
Pump Type Piston-type pump geared
from fly wheel
Pump Output (Steering) 387 L/min 102 gal/min
Pump Output (Implement) 226 L/min 60 gal/min
Tilt Cylinder Rod End Flow 140 L/min 37 gal/min
Tilt Cylinder Head End Flow 188 L/min 50 gal/min
Lift Cylinder Relief Valve Setting 26 200 kPa 3,800 psi
Tilt Cylinder Relief Valve Setting 19 300 kPa 2,800 psi
Ripper (Lift) Relief Valve Setting 26 200 kPa 3,800 psi
Ripper (Pitch) Relief Valve Setting 26 200 kPa 3,800 psi
Steering System Pressure 40 500 kPa 5,875 psi
Tank Capacity 89 L 23.5 gal
• Steering Pump output measured at 1,800 rpm and 30 000 kPa
(4,351 psi).
• Implement Pump output measured at 1,800 rpm and 20 000 kPa
(2,900 psi).
• Electro-hydraulic pilot valve assists operations of ripper and dozer
controls. Standard hydraulic systems includes four valves.
• Complete system consists of pump, tank with fi lter, oil cooler,
valves, lines, linkage and control levers.
Undercarriage
Shoe Type Extreme Service
Width of Shoe 610 mm 24 in
Shoes/Side 43
Grouser Height 84 mm 3.3 in
Pitch 240 mm 9.4 in
Ground Clearance 596 mm 23.5 in
Track Gauge 2250 mm 88.6 in
Length of Track on Ground 3470 mm 136.6 in
Ground Contact Area 4.24 m2 6569 in2
Track Rollers/Side 8
Number of Carrier Rollers 1 per side (optional)
• Positive Pin Retention Track.
21
D9T Dozer Specifications
Service Refill Capacities
Fuel Tank 821 L 217 gal
DEF Tank 36 L 9.5 gal
Cooling System 98 L 25.9 gal
Engine Crankcase* 37 L 9.7 gal
Power Train 164 L 43.3 gal
Final Drives (each) 15 L 3.9 gal
Roller Frames (each) 45 L 11.9 gal
Pivot Shaft Compartment 30 L 7.9 gal
Hydraulic Tank Oil (only) 89 L 23.5 gal
*With oil fi lters.
Winches
Winch Model PA 140VS
Weight* 1790 kg 3,950 lb
Oil Capacity 15 L 4 gal
Increased Tractor Length 557 mm 21.9 in
Drum Width 320 mm 12.6 in
Wire Cable Diameter
Recommended 28 mm 1.13 in
Optional 32 mm 1.25 in
Maximum drum capacity
Recommended Cable Length 78 m 257 ft
Optional Cable Length 62 m 204 ft
Wire Cable Ferrule Size –
Outside Diameter
60 mm 2.4 in
Wire Cable Ferrule Size – Length 70 mm 2.8 in